A Quick Overlook of – Your Cheatsheet
Quick Tips to Finding Hidden Piping and Valves
Should you be a homeowner then knowing the details of your home like the back of your hand is something that is very important. It is important to ensure that you are keen as well and are able to know where things like gas piping as well as valves are so that you are able to switch them off in case of an emergency. Some of the ways that you can be able to find out where the various shut off valves are located are briefly highlighted below.
In order to locate the gas shutoff valve then you need to find out if you have natural gas since the shutoff valve will be located outside the home just before the gas meter. Such nubs are usually rectangular in shape and usually use a wrench and gas companies do not recommend touching them. There is however a side valve that is usually located where the gas pipe first enters or much further down the line.
There are high chances that the gas pipes you have are made from flexible copper if you own a modern home and the valves are most likely to be located in the utility room. If you find such a piping in your home then you are sure that you have a really high pressure gas system. Such gas systems usually have the shutoff valve near the water heater or the furnace.
For water meters, you are likely to get that you have two shutoff valves one before and the other after the meter. In environments where it is really cold you are most likely to get the shut off points located in the house to prevent freezing. For milder climates, you are most likely to find out that the valves are located in an underground lid or box next to exterior.
Take time to look at property reports if you are finding it hard to locate water shut off valve since they are usually indicated in property reports given in the last phase of the property purchase. When you look at the report, you are sure that you will be able to find out where the valve is located. With the report, you are able to see the picture of the valves so that you are able to know how they look like so that you can shut them off.
With most automatic sprinklers located underground, there is a very high chance that they may be a little bit harder to find. By using a metal detector, you are sure that you will be able to find such valves since they are usually made up of metals. Even though such valves may not be located exactly where the plans says using the plans is something that will definitely help you to find out where you need to start.